American Fibertek SM24p-PoE Manuel d'instructions télécharger pdf (Page 69)

User Manual

Rev.A1

1-Mar-11

Parameter description:

Status:

Include “Normal” or “Active” two kinds of status. The former means the

port is ready to link and supply the power to the PD at any time. The

latter means the port is in the condition of supplying the power.

State:

“Enable” means the manager allows the power supplied to the PD is

legal while the port linked to the PD; “Disable” means the port does not

own PoE function.

Priority:

Three options are offered for the user to choose, including Normal, Low

and High. Default is Normal. The switch will stop supplying the power to

the port based on the order of the priority LowNormalHigh in case

total power required by all PDs linked to the switch excesses the power

limit. As the ports have the same priority, then the switch will cease the

power supplement from the port with the highest port id (121).

Power (W):

The power is consumed by the port.

Current (mA):

The current is supplied to the PD by the port.

Class:

The Class of the PD linked to the port of the switch.

Delay time:

The Delay time is using for set the time period for PD PoE enable time

delay period. It is a solution to avoid rush current to cause shorter PD.

The available time period is from 0 to 300 seconds and 0 means disable

the function.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 124 125

Pas de commentaire

American Fibertek SM24p-PoE Manuel d'instructions Page 69