American Fibertek SM24p-PoE Manuel d'instructions télécharger pdf (Page 100)

User Manual

92 Rev A1

1-Mar-11

4-2-15. Storm Control

Function name:

Storm Control

Function description:

Storm Control is used to block unnecessary multicast and broadcast

frames that reduce switch’s performance. When the function is enabled

and Storm Control rate settings are detected as exceeded, the

unnecessary frames would be dropped.

Fig.4-26 Storm Control Configuration

Parameter description:

ICMP Rate:

To enable the ICMP Storm capability. User can use drop-down menu to

select number of frames. Default is No Limit. The setting range is

1k~1024k per second.

Learn Frames Rate:

To enable the Learn Frames Storm capability. User can use drop-down

menu to select number of frames. Default is No Limit. The setting range

is 1k~1024k per second.

Broadcast Rate:

To enable the Broadcast Storm capability. User can use drop-down menu

to select number of frames. Default is No Limit. The setting range is

1k~1024k per second.

Multicast Rate:

To enable the Multicast Storm capability. User can use drop-down menu

to select number of frames. Default is No Limit. The setting range is

1k~1024k per second.

Flooded unicast Rate:

To enable the Flooded unicast Storm capability. User can use drop-down

menu to select number of frames. Default is No Limit. The setting range

is 1k~1024k per second.

NOTE:

After completing the function’s setting, press <Apply> button to have this

function taken effect.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 124 125

Pas de commentaire

American Fibertek SM24p-PoE Manuel d'instructions Page 100